English | Dutch

Learn how to Plunge Cut With a Hand Wood Router

    Miles Bruhn
    By Miles Bruhn

    A plunge cut is a cut which goes in to the the top of a material previously mentioned. Plunge-cutting with a router should be done with a specific plunge router as well as a plunge-cutting router bit - a router bit that features a bottom cut facility, which suggests their cutting edges extend throughout the bottom in the bit. Other routers are fixed base routers will not be ideal for making plunge cuts.

    Ensure you have the right sort of router bit. Guarantee the bit you ultimately choose is designed to plunge-cut, or, the end will spin up against the surface of the material and will probably burn it. Plunge cutting router bits may be labelled as bits using a bottom cut function, but when you're unsure make sure the specifications of individual bits before you use them. While using the wrong equipment can harm your machinery and your workpiece.

    image

    Set the height of your respective router bit. In order to plunge-cut right down to a particular depth, you should set the depth on your router before working. How you do this is determined by the manufacturer of router you choose, but many work with a way of depth stop (often a rod and column) that can be adjusted for the height you require. The depth stop limits what lengths into material the part could be lowered. The buzz branded routers use a 3 turret depth stop that enables you to pre-set 3 separate heights for plunge cutting that may simply be changed when you work.

    Step one. Activate the router minimizing the part down on top of the workpiece.

    2. After the bit has cut through the surface, you'll be able to move the router to generate your selected cut.

    Make deeper cuts progressively! Plunging deeper than several millimetres with a single cut should not be done. Instead, you ought to make a group of shallow cuts which will get progressively deeper. Which means that less strain lies about the cutting edges of one's router bit, and on the router's motor itself.

    Take regular breaks. Every now and then you must bring the router bit back out from the material and switch the router off therefore the motor and router bit can cool down, and you will clear any debris in the cut. You should also clear any waste material from your cut to stop it from becoming clogged. Make sure you readily appropriate dust extractor while using the routers.

    More info about cnc wood router go our website.

      Miles Bruhn

      Miles Bruhn